Community pool water does not contamination
How to make community pool water does not contamination. If contamination what is method to make it clean agatoo crowde people and kids at community pool make the water dirty. the managers decided to run filter pump 24 hrs to make it clean.
I disagree because the motor will broken in the long run. I think there are the other ways to make the water is not contaminatione.
Related articles
- Why Use Swimming Pool Sand Filters (sandpoolfilter.com)
- Run 2 pool filters and pumps in line at the same time (poolfiltration.net)
- How do you plug a pool vacuum cleaner in? (vacuumpoolcleaner.com)
- Best value for the money for both pool and spa (poolsbuilder.com)
- How To Use And Maintain Your Concrete Pool (bestpoolcleaner.org)


If the chemicals in the water are being maintained and it’s still getting dirty then your only option is running the pump so the filter can work. The motor will break after a certain number of hours of operation, but that’s why they make them so they can be replaced.
The filter will only remove solid dirt. The water should be chlorinated. The more people that use the pool, the more chlorine will be needed but there are a lot of other things to consider to have balanced water. The correct chlorine or Bromine level is essential for safety reasons. There are other more advanced systems but I am guessing you will not be useing them.Chlorine to steralise and filter to remove dirt.
Most commercial pools need the filter to run 24 hours a day.They usually size them to run around 30 hours under a heavy bather load,then you will have to clean the filter as it will be full or stopped up.The 30 hours is so you can run a full day and have a little extra time to clean it. Most are chlorinated thru the filter system so when you shut down the pump,you are also stop sanitizing as well.The filter is made to run 24 hours. This is normal for a commercial pool. The motor life is 3 to 5 years if you keep the filter clean.